• Spray in well-ventilated areas with good air movement. Use only non-sparking fans if one is needed.
  • Remove, extinguish or unplug all ignition sources such as…
    • cigarettes
    • pilot lights; stoves & ranges, water heaters, furnaces
    • all electric appliances
  • Put gas powered sprayers outside the building and run the hose into the room to be sprayed. Even though the sprayer is outside, always ground the sprayer to prevent static sparking.
  • Keep the work area free of debris that could contribute to a fire such as;
    • open or empty paint/material cans
    • open or empty solvent/thinner cans
    • rags, especially used ones
    • paper, masking
  • Prevent sparks and static sparking
    • Use only grounded hoses
      Check hoses periodically for electrical continuity using and ohm meter.
    • Tape wall switches to help prevent them from being used
    • Use only grounded metal pails when spraying/painting, flushing or cleaning
      Connect the pail to a true earth ground according to your local electric code.
  • Ground the sprayer regardless of the power source!Electric Powered Sprayers
    • Plug into a properly grounded 3-wire outlet
      You should check to make sure that the outlet is actually grounded.
      (see an easy and inexpensive way to)
    • Be sure the grounding prong is in place on the cord
      If it is missing replace the plug
    • Use a grounded extension cord of at least 12 gauge wire and rated for 15 amps or more
      (more you should know about extension cords)

    Gas engine powered sprayers and air (pneumatic) powered sprayers

    • Connect the pail to a true earth ground according to your local electric code.
      Graco airless sprayers have a grounding lug to use with a ground wire clamp

To help prevent injection injuries…
Graco airless spray guns have a tip guard which helps prevent your hand or body coming too close tot he spray tip

  • Have the tip guard on the gun when spraying
  • Always use the spray gun trigger safety when not spraying
  • Relieve fluid pressure when cleaning or servicing any part of the equipment. To relieve pressure, shut off the sprayer, trigger the gun, and open the pressure drain valve.
  • Always point the gun away from yourself and others
  • Do not try and stop leaks with your hand or body
  • Follow the instructions manual when it comes to proper flushing methods, or visit our airless sprayer cleaning page
  • Remove the spray tip, reduce the material/fluid pressure and immerse the gun nozzle in the fluid when flushing

To help prevent accidentally triggering/  spraying the gun…

  • Put the trigger safety latch on when you are not spraying
    This is a good habit to get into
  • Always keep the trigger guard on the gun! The guard helps prevent the trigger from being bumped or otherwise accidentally triggered

Other safety considerations

  • Wear safety glasses to protect your eyes from spray material / paint or solvent
  • Wear a respirator when using toxic or noxious paint or solvent.
    Follow the material manufacturers guidelines to select the correct respirator and or cartridges
  • Read and save the instruction manuals supplied with the equipment. The manuals contain important information on airless spray safety