The #1 spray painting tip is when you pull the trigger on an airless you had better be ready to spray because pure paint is coming out of that gun at 2,000 psi. So don’t put any kind of skin in front of it. That’s kind of painful.

An airless is the best way to paint a large project. It will use up a lot more paint but you will gain on the speed. You will have to make that choice. You know the project.

You can paint the interior walls of a new house that doesn’t have anything in it yet. Always remember to back roll because if you don’t and it needs touching up, it won’t. If you live in the house that’s going to get sprayed it might be hard to tape and cover everything up. It might not be worth the effort.

On the outside is another subject. Cover the windows and doors. Also the bushes. They look funny with specks all over them. Also don’t forget the cars. With the right breeze you will be saying,”I didn’t know that car was metal flaked!” And you don’t want that.

If you have never used an airless sprayer before, go to the back or where ever a large area out of sight is to start.You need to get used to it before starting in the high traffic area where every one will see your work.

Start at the top and work your way down. Use a shield to protect the parts of the house that you are spraying up against. You don’t want to spray the brick or trim that wasn’t suppose to be that color.

These spray painting tips will help you get started painting your house. Take your time and you will be able to paint the house in no time and be proud of it. Always remember not to put the paint on to thick. Two thin coats are much better than one thick coat.

Once you finish spraying always clean the sprayer out completely so the next time you use it it will work. It’s also best to run some mineral spirits through it after cleaning with water. This will keep it lubricated so moving parts want rust.

Should I Paint My Texture Ceiling With A Sprayer Or A Roller?

How to paint spray texture ceilings have long been the subject of debate among painters and handymen. The alternatives could either be using spray or a roller. Which is the better option? Easier? Less expensive?

Let’s evaluate both options and see which comes out more suited to your needs and budget.

Spray Painting

The more popular opinion among paint contractors is that using a sprayer is the better route when painting a spray texture ceiling. And really, for the experienced spray painter, it is the easier method. You don’t even have to touch the ceiling and still get even coverage. Even if you have some “looseness” in the texture, simply using an oil-based paint can do the trick for a flawless finish.

Spray painting also takes much less time than rolling, so the painters can be in and out of your house in no time. If you hire a contractor who already has a spray unit available and you don’t need to buy or rent, spray painting definitely is the cheaper option because you won’t need to spend as much on labor.

On the other hand, using spraying obviously requires the use of a spray unit. If you are not skilled in using one, you really need to test it to get an idea of how the spray gun works, and the area it covers with a single pull of the trigger. If you won’t be doing the work yourself though, and plan to hire painters who are familiar with the process and the equipment, you should have no worries there.

The only other thing that you need to remember before even beginning to spray paint is that everything within the room should be protected. You may have all the furniture taken out or have them gathered in the center of the room and covered with a tarp. This will ensure that your items will not be accidentally sprayed on.

Rolling Paint

Rolling paint on your ceiling is another option that you can take. This method actually allows for more durability in the long run, and gives you a better base for future repainting. Whether you plan to paint a flat or textured ceiling, paint rolling provides for a thicker paint application and the thicker the coat of paint on your ceiling, the more resistant it is to stains and mildew.

When you use the paint rolling method, you also need to use acrylic latex paint which bonds tighter to your ceiling and therefore lessens the chances of your texture ceiling to loosen and fall down on you.

The disadvantage of this method is that it typically takes a lot more time than spray painting. First, you would need to have the ceiling primed with one coat of a oil-based primer or sealer. Then the painting itself requires a more systematic process, starting with the main part of the ceiling then working towards the walls as close as you can without touching the walls with your roller. Then you paint the perimeter using a brush.

While the process certainly takes time, if you or your handyman does it the proper way, you can be sure that your painted ceiling will last you a long time.